Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Monday, September 27, 2021 9:53:35 AM(UTC)

Rank: Newbie

Groups: Registered, Registered Users, Subscribers
Joined: 9/22/2021(UTC)
Posts: 1

Tips To Install Basic Zipper For Beginners

Zippers are seen as an amazing invention because it is easy to use for everyone. Zippers are often made from metal, plastic, or nylon. The zipper is fitted on a woven, nonwoven tape product of cotton, cotton mix, or polyester. As a beginner, you may wonder how to insert a zipper.

This post will help you to learn how to apply a basic zipper. And if you want to know more about the best first sewing machine to practice installing zippers for the first time, just read the post The Best First Sewing Machine For Beginners to get more useful information.

Three main types of zippers for beginners

1. Interface zipper

Before starting to insert a zipper, you should have a suitable plan to feature an interfacing strip on the seam line. Especially, support the zipper’s weight and stabilize the material for a lightweight or unstable cloth. A wide and the length of the zipper gap related to liquified interfacing of a strip of light-weight.

Zippers are easy to use for everyone

2. The centered zipper

This zipper allows opening seam along, and press the seam open. For this kind of zipper, you should use a ballroom dance method. First, you should machine-basting the zipper tape to the seam allowances. After that, topstitching the zipper in situ from the suitable aspect of the garment. You should sew from bottom to top on all sides through all thicknesses to avoid rippled edges.

Also, you can use your machine’s zipper foot to help you sew near the zipper teeth. It is also helped you take away the seamline basting stitches when you finish sewing the zipper. For beginner sewers, prepare the best starter sewing machine to practice this centered zipper!

3. The invisible zipper

This zipper is the simplest and quickest one. Thus, it requires basting or topstitching. Using an invisible zipper help you sew extraordinarily near the zipper coils. Thus, you can create an invisible one from a suitable aspect. Remember to apply the zipper before sewing the garment seam. You should remove the zipper and press the coils with a cool iron. Then, insert the zipper without shutting it.

Determining the position of the zipper might be confusing initially. So, you need to keep the zipper and the garment right sides along with the zipper coils on the seamlines. Remember to put the zipper foot in the position that the needle clears the middle hole.

Remember to apply the zipper before sewing the garment seam

You should stitch the left aspect of the zipper to the suitable garment section. Remember to sew to the bottom, till the end of the zipper. Then, align the remaining tape to the left side of the garment and sew in situ. Thus, the garment seam is completed.

Remember that you cannot stitch the seam. So, it only links with the zipper handicraft while not going away a spot. You are recommended to begin a seam with the nearest zipper stop. After that, close the gap by hand-sewing. Or, you can use a sewing machine to complete the seam. But, a zipper foot should be switched to urge those final stitches.

The first sewing machine is the most important part you should have before starting to work as a sewer. Thus, we recommend you buy a good basic sewing machine which is the best computerized sewing machine for beginners. Visit CraftsSelection to read more!

Edited by user Tuesday, August 9, 2022 9:18:06 AM(UTC)  | Reason: Not specified

MS Support  
#2 Posted : Tuesday, September 28, 2021 2:19:38 PM(UTC)
MS Support

Rank: Advanced Member

Groups: Moderators, Registered, Registered Users, Subscribers
Joined: 10/8/2010(UTC)
Posts: 1,944

Thanks: 87 times
Was thanked: 155 time(s) in 150 post(s)
Originally Posted by: RonaldBarrett Go to Quoted Post

I install Metastock 11. MetaStock requires online activation but I can't activate it. However, I used it normally until the 30th day it didn't work anymore. Do you know the cause?


The licensing technology used in MetaStock 10 & 11 is no longer supported. The topic https://forum.metastock....k-versions-10-through-11 references this information. You may wish to contact our Sales team ( https://www.metastock.com/company/contact.aspx ) to see what upgrade options are available to you.

thanks 1 user thanked MS Support for this useful post.
AndreReeves on 6/8/2023(UTC)
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.