I have a problem with the Y-Axis properties for Volume that perhaps someone has a work around for. I am running MS 10.1. For some reason, the Auto setting for minimum Volume is always a very large NEGATIVE number. That results in a gap between 0 on the Y- axis and the displayed date scale on the X-axis. Look at the .png file attached. You will see the gap I am talking about just above the X-axis dates. Also noted is the negative default value for the Minimum volume. This is what creates the gap. If you set the Minimum volume to zero, the gap disappears. Normally this does not cause a problem. But when I am trying to squeeze 7 or 8 plots on one chart, every inch counts! I can manually reset the Y-axis minimum to zero, but as soon as I close the file and reopen it, the minimum reverts back to a large negative number. Saving the file makes no difference, nor does adding it to the Default file. If I open the X-axis properties and check "retain scale", then my manually set minimum volume is saved. But then I am locked into loading a specific data set size. Any way to set this Y-axis minimum without restricting the X-axis properties? (The same problem existed with 8.01). Harry