logo
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Alex  
#1 Posted : Tuesday, January 15, 2013 7:23:52 AM(UTC)
Alex

Rank: Advanced Member

Groups: Registered, Registered Users
Joined: 9/14/2006(UTC)
Posts: 321


In this issue:

Main Article

Point and Figure Charting

Contributed by Remould Robert (Remo), Director and Founder of www.chartsview.co.uk

Point and figure charting is a popular charting method used in technical analysis. Point and figure charts are used because they are distinctive in terms of their analysis and construction, unlike other charts, time does not play a big factor. They are plotted on a grid and are made up of O's and X's. O's are used when the price moves down and X's are used when they go up, each box on the grid will be used for O's or X's.

Prices movements are plotted on the vertical axis (y axis) and direction changes are plotted on the horizontal axis (x-axis), prices are scaled on the vertical axis. A box represents the number of points that you have selected. When the price goes up then you would mark it with an X but only when the market price rises completely through the box then you would place an X in the box, so every full box size will generate an X.

For O's to be generated the price must reverse a minimum of 1-box (1-box reversal) but most commonly used is a 3-box reversal, which requires the correction of 3 boxes before the O's can be plotted. This will help filter out most of the noise so time is not really a factor. Once in the trend the next X or O will only need 1-box move to register on the chart whereas a reversal will require 3-box move in the opposite direction to register. That's why it's called a 3-box reversal. It's up to you what setting you want to use, for example you can use a 5-box reversal but remember this will take a lot longer to see the movements on the chart. Therefore, the usual preference is the 3-box reversal and this is the most common one.

Another way to change the setting will be the price move itself e.g.




The following table will help you to decide what box sizes to use, you should really try and experiment with different box sizes to suit your share.





As can be seen from the chart above when prices reverse the X or the O is not in the same column. Every reversal will start in a new column and it must reverse by 3 to generate a reversal. For example: If you are plotting a 5 by 3 (5*3), 5=box size and the 3=reversal.

If the latest box to be filled is 300 and the price rises to 305 then you would place another X in the 305 box. If then the price rises to 309 then you would ignore this, as it has not moved by 5 points. If the price suddenly moves to 323 then you would place an X up to the 320 mark (310,315,320), you would discard the 323 price as it has not moved by 5 clear points.

If the price then turns down and moves to 313 you would still not plot any O as it has not corrected by 3 box sizes. For a new set of O's to be plotted the price must move 5*3=15 points, the current high is 320 - 15 points therefore 305 will be the level before a new set of O's can be plotted. Remember every box is equal to 5 points so once 305 is hit then you would plot an O in 315, 310 and 305 hence a new column of O's. All the above is based on intraday moves as most point and figure charts are done on intraday.

End of Day

There are different time frames you can use with point and figure. End of day point and figure is plotted exactly like the intraday point and figure but only the closing price is used. So it misses a lot of the intraday moves, a bit like the line charts where all the important levels will be missed. See chart below for end of day:



High/Low

This method uses the whole days moves so you use a lot more data, it totally ignores the closing prices. This method has the advantage that you can read the supports and resistances levels much better and clearer, see chart below for example:



Trend lines

  • Trend lines are drawn from an extreme bottom or top with a 45-degree angle attached to it.
  • Bullish trend lines are drawn from a known low at 45-degrees pointing upwards.
  • Bearish trend lines are drawn from a known high at 45-degrees pointing downwards.


Common Buy and Sell Indicator







Price Targets

Point and figure charts have the ability to project targets; there are 2 ways to count these either using the horizontal or the vertical count.
  • Vertical count. Upwards Target - This is done by counting the number of X's in the move up then multiply by the box size and then multiply by the reversal box, i.e. number of X's 6, Box size 1, reversal box size 3 and Target = 18. Once you have your target you use the previous low of O's as the bottom and then you project it from there, you have your target. This is best used from a low point and the reverse is true for downside target.


  • Horizontal Target - This is done using congestion area (sideways moves). The way to do the count is for an upside Target Columns x Box size x Reversal. You need to use the move that started the congestion and count from there to the move out of the congestion. So if there are 10 columns (including the start and finish columns) you would multiply that by the box size and then multiply that by the reversal so if box size is 5 and reversal is 3 then you would have 10x5x3 = 150 points target. This then is added to the lowest point of the congestion and projected up from there. The reverse is true for a downside target.


There are many different signals on the point and figure charts and so you do really need to read about them first. The above is just an introduction to point and figure charting.

Advantages
  • From the charts you can see almost the entire trading history on one page.
  • Easy to see buy and sell signals.
  • Trend is clear to see.
  • Point and figure charts have targets.

About Remould (Remo) Robert

Remo has over 20 years experience in technical analysis, its his love for technical analysis and his passion to help others to succeed in trading that saw him run one of the most successful private members board in the UK. He decided to take this community further and now runs his own ChartsView community at http://www.chartsview.co.uk, which includes regular technical analysis on shares, great trade set-ups and regular tips, a comprehensive learning section and a community of active traders from around the world.

Back to top


Support Tip

How do I apply a template to a chart?

Contributed by MetaStock Support

MetaStock 12 has made applying indicators and templates to a chart easier. This support tip will focus solely on applying a template to a chart. Templates give you access to preset indicators and systems, enhancing your charts. A template can be applied as a chart is opened from the Power Console. Here's how:

1) After selecting an instrument, click "next".


2) The next screen to appear is the Chart Options. Select "apply template" and choose the desired template from the list.


3) For this example, we chose the Darvas Box template.


*** Tip
A template can be applied to an open chart by right clicking anywhere on the chart. In the popup menu, select "apply template." Select the template from the list and click "open."

1) Right click anywhere on the chart.


2) Select the template you wish to view and click "apply." This will automatically add the template to your chart.


3) For this example, we used the Darvas Box.

Back to top


MetaStock Power User Tip

LMS Trailing Stop Fixed %

Contributed by Breakaway Training Solutions

Would you like to plot a trailing stop on your chart that you can customize? In this four minute video, Kevin Nelson will show you how you can download your own percentage-based trailing stop and also how to use it. You'll be able adjust the sensitivity of it to your specifications and whether you want to use it on long or short trades. Have a look!

http://www.youtube.com/watch?v=00pU8CLEeT8

For more MetaStock training, make sure to visit Breakaway Training Solutions at www.learnmetastock.com or email Breakaway Training Solutions at admin@breakawayts.com.

About Kevin Nelson

Kevin Nelson is the founder of Breakaway Training Solutions, Inc. He has spent the last 17 years becoming an expert on MetaStock software and a serious student of technical analysis while working for MetaStock. Prior to joining MetaStock in 1993, Kevin was a stockbroker for a well-known NYSE firm. In his role as Sales Manager at MetaStock, Kevin interacted extensively with MetaStock customers via phone, webinars, and public appearances. His experiences while working at MetaStock have enabled him to gain a keen understanding of the needs of technical analysts worldwide. While with MetaStock, Mr. Nelson was a featured presenter for four years. During this time, he traveled the U.S. introducing the MetaStock program to thousands of people and teaching them how to use its many features. His easy-to-understand approach is considered by many to be the best in the industry.

©Breakaway Training Solutions, Inc. 2013

Back to top

Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.